HomeAbout UsCareers

APPLY TODAY

We are looking forward to reviewing your application. Please review our open positions and submit your application here.

 

 

Current OpeningsEMSG team picture

 

 

-Full time AOI Operator – 1st and 2nd shift

The AOI (automated optical inspection) operator must be knowledgeable on the operation of the AOI machine and the processes associated with it in assuring a quality product.

The operator must possess a sufficient understanding of electronic components and knowledge of processes associated with the assembly and final assembly of printed circuit board assemblies. Must be highly proficient at IPC-A-610, Class 2 soldering standard.  Must be able to recognize common errors, which include insufficient solder, solder bridges or shorts, cold solder joints, and too much solder on through-hole and surface mount assemblies. Must possess above average knowledge to detect backwards parts, wrong parts, missing parts, parts lifted, leads bent under, leads shorted, pads damaged, tracks lifted, and/or parts damaged on SMT and through-hole assemblies.  Must be able to read and comprehend drawings, bill of materials and other provided product information in order to assure a quality product was built to customer specifications.

The AOI inspection process should be completed in a reasonable amount of time, with minimal to no supervision.  The AOI operator may reject defective items outright, send them for repair or correction, or fix minor problems themselves. May need to add labels, serial numbers, markings, or tags, and may be required to record data. When defects are found, the AOI operator notifies supervisors or management so that the production problem can be analyzed and corrected.

The physical requirements for the AOI operator position are to regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. This position may require standing or sitting and the employee may be asked to assist with work in other departments.

 

-Full time Test Technician II - 1st shift

Perform testing and troubleshooting of printed circuit board assemblies, both analog and digital, from established procedures using various test equipment and schematics, engineering drawings, bill of materials, and written/verbal instruction to ensure unit functions according to specifications or to determine cause of unit failure by performing the following duties.

Operate related electronic and mechanical equipment to test and validate product. Connect unit to be tested to test equipment such as signal generator, frequency meter, power supply, digital voltmeter, and oscilloscope. Read digital displays that indicate electronic characteristics such as voltage, frequency, distortion, inductance, and capacitance.

Use predetermined methods, sequences, and set ups to test the product, making necessary modifications and adjustments. Compare results with specifications and may be required to record test data.

Troubleshoot problems to the component level. Must be able to identify common soldering and component errors on printed circuit board assemblies. Analyze test results on defective units to determine cause of failure. Replace defective wiring and components or record defects on tag attached to unit and return unit to production department for repair. May need to add labels, serial numbers, markings, or tags. Recommend changes or modifications to improve quality of product. Confer with supervisor or other technicians to resolve problems regarding testing procedures and test results. Perform service repairs on customer returned units. Provide technical assistance as needed.

Demonstrate the ability to work independently or to work effectively with others. Job functions should be completed in a reasonable amount of time, with minimal supervision.  Must have good oral and written communication skills.

Job may require standing or sitting.  May be asked to assist with work in other departments.  Must be able to regularly lift or move at least 25 pounds and occasionally lift and/or move up to 65 pounds.

A qualified technician must have at least a 2-year degree in electronic technology and a minimum of 2 years related technical experience and possess basic PC skills.

 

-Full time Quality Assurance Inspector - 1st shift

If inspecting printed circuit board assemblies, the inspector must have a sufficient understanding of electronic components and knowledge of processes associated with the assembly and final assembly of printed circuit board assemblies, and be proficient at IPC-A-610, Class 2 soldering standard. Must be able to recognize common errors, which include insufficient solder, solder bridges or shorts, cold solder joints, and too much solder on through-hole and surface mount assemblies. Must possess above average knowledge to detect backwards parts, wrong parts, missing parts, parts lifted, leads bent under, leads shorted, pads damaged, tracks lifted, and/or parts damaged on SMT and through-hole assemblies.

Inspection of all products:

Must be able to read and comprehend drawings, bill of materials and other provided product information in order to assure a quality product was built to customer specifications. The inspection process should be completed in a reasonable amount of time, with minimal to no supervision.

May be required to set up and test certain products. The Inspector may reject defective items outright, send them for repair or correction, or fix minor problems themselves. May need to add labels, serial numbers, markings, tags and may be required to record data. When defects are found, inspectors notify the Senior QA Inspector, supervisors or management so that the production problem can be analyzed and corrected.

The physical requirements for the QA Inspector position are frequently lift and/or move up to 10 lbs., and occasionally lift and/or move up to 25 lbs. The job may require standing or sitting and the employee may be asked to assist with work in other departments.

 

-PCB Solderer, Level III – Rework Specialist – 1st shift

Soldering skills are required for through-hole and surface mount components. Must be proficient at soldering to acceptable IPC-A-610, Class 3 standards. Must show equal ability on lead-free and leaded solder. Requires proficiency at soldering small discrete components such as 0402’s. Must have above average knowledge of electronics and components. Must be able to distinguish between IPC acceptable and non-conforming product, per IPC-A-610, Class 3. Demonstrate ability to remove and replace complex through-hole and surface mount components with more than 8 leads.

Must demonstrate the ability and skill to adeptly perform complex rework on printed circuit board assemblies. Must show the aptitude to determine the method and tools to use to remove soldered components from PCBA’s, and then demonstrate skill to remove those parts without harm to the board, part, pads, or tracks.

Must be able to read and comprehend drawings, bills of materials, and other provided product information. Must show ability to follow instruction well and, with the use of learned skills and reason, complete assigned work accurately, in the least amount of time, with minimal to no supervision. Demonstrate the ability to assist co-workers in supervisor’s absence.

The physical requirements for the position are to regularly lift and/or move up to 10 pounds and frequently lift and/or move up to 35 pounds. Must be capable of hand assembly. May be required to use hand tools and power tools. This position may require standing or sitting and the employee may be asked to assist with assembly in other departments.

 

smiling employee working on PCB assembly

Independent Outside Sales Representative

Electronic Manufacturing Services Group, Inc. (EMSG) a leading electronic contract manufacturer located in York, PA is looking for an independent outside sales representative. Specifically covering any of the following areas:

New Jersey and North: Northern New Jersey, New York, Connecticut, Massachusetts, Rhode Island

Pittsburgh and West: Western PA, West Virginia, Ohio, Indiana, Illinois, Michigan

Virginia and South: Virginia, North Carolina, South Carolina, Tennessee, Georgia

As a leading electronic contract manufacturer, EMSG prides itself on its fast turnaround, prompt delivery, and superior service. A leader in its field since 1995, EMSG understands that every customer is unique and requires special attention.

Responsibilities include but are not limited to:

  • Develop and execute a sales plan in an assigned territory to meet/exceed sales goals.
  • Maintain and grow the existing customer base.
  • Identify opportunities, qualify prospective customers and secure new business.
  • Demonstrate professionalism and excellence in business on a daily basis.

Requirements:

  • Basic computer literacy
  • College degree
  • Strong organization skills
  • Self-initiated, highly motivated and goal-oriented to deliver high-quality results
  • Excellent oral and written communication skills
  • Able to prioritize, multi-task and effectively solve problems
  • Possess a current, valid driver’s license

 

These positions offer a pleasant work environment and excellent benefit package. Apply online or in person to Electronic Manufacturing Services Group, 951 Monocacy Road, York, PA 17404.

We want to work with you!